Mounting rail system

The Click&Go mounting system is designed to install PV laminates easily and aesthetically on a facade or a roof. Fitting pieces are available to fill in the layout of PV modules around windows and at the sides near the roof and the edges of the facade.

The Click&Go system is the construction interface between the PV laminates and the construction wall/roof.

The Click&Go mounting system consists of following parts:

• The rear frame (including Click&Go connectors) that is glued to the rear side of the PV laminate. The connectors (at the four corners) can easily be snapped on the axles that are fixed to the mounting rails.
• The substructure of the mounting rail system that is fixed onto the construction wall or construction roof.